EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Demand Controller is a highly effective photo voltaic controller made for off-grid photo voltaic techniques. Based on multiphase synchronous rectification technological know-how, it guarantees optimized energy conversion and technique security for a wide array of photovoltaic (PV) purposes.
Key Characteristics of the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technology for exceptional solar Power harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for Improved battery everyday living.
Liquid crystal display Exhibit with authentic-time facts checking.
Numerous Load Management Modes like guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the design quantity and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Select a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable security protocols and make visit here sure the process is driven off right before connecting components.
Phase 1: Join the battery terminals to your cost controller (beneficial to positive, damaging to negative).
Move two: Link the solar panel array to the PV input terminals.
Stage 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Electrical power on the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Management.
5. Monitoring and Information Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Knowledge is usually logged by means of the RS485 communication port applying software package including Photo voltaic Station Personal computer.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Widespread Problems
Challenge 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation two: More than-Voltage Defense
Confirm the solar array’s voltage ranking.
Alter procedure parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Reduced Vitality losses during conversion.
Improved Reliability: Steady performance underneath variable loads.
For a longer time Battery Daily life: Steady and correct charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technology is an Excellent option for optimizing solar power era and increasing battery daily life. By next the above setup guideline, buyers can ensure maximum efficiency and procedure longevity.