EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Charge Controller can be a really effective solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Key Features from the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Key features consist of:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Display screen with serious-time details monitoring.
Multiple Load Manage Modes such as manual and timer.
Comprehensive Electronic Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product variety and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Pick out a perfectly-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Warning: Constantly stick to proper protection protocols and make sure the program is powered off right before connecting parts.
Phase 1: Join the battery terminals into the demand controller (constructive to optimistic, unfavorable to negative).
Action 2: Connect the photo voltaic panel array on the PV input terminals.
Action 3: Connect the load terminals if employing a direct load relationship.
Action 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability about the controller by connecting the battery initial.
Utilize the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software including Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Difficulty 1: No Electrical power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Regulate technique parameters if necessary.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification know-how guarantees:
Better Efficiency: Lowered Power losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification More info technology is surely an Remarkable choice for optimizing solar power technology and increasing battery existence. By pursuing the above mentioned setup information, buyers can guarantee optimum effectiveness and process longevity.